SP-32
| Diameter | 32 mm |
|---|---|
| Headstock stroke | 310 mm / 80 mm (fixed headstock lathe) |
| Machining possibilities |  |
Kinematics & tools
- 6-station tool holder on the tool post
- 5-station drilling unit including sleeves on the front and rear side
- 6 + α power-driven tools on tool post for cross machining
- 5 + α power-driven tools including sleeves for backworking on 4 stations
- 7 axes
SP
32
Powerful all-rounder
for complex turned parts
With the new SP-32, the already proven SP-23 finally gets its big brother! With six turning tools and six driven cross-processing stations of which, four are interchangeable – it is the true allrounder for long and short turned parts. Back-side machining has been expanded to five stations. The proven driven tools of the SR class can still be used. With the optional ‘HIGH TORQUE’ option for the main and back spindle, you can easily master even the heaviest roughing and drilling tasks.
Advantages
- FANUC 0i-TF Plus control system with electronic handwheel
- C axis control as standard on main and sub spindles
- fully independent backworking with 5 stations
- convertible from sliding headstock to fixed headstock lathe
- movable control panel
Specifications
| General information | SP-32 |
|---|---|
| Number of axes | 7 |
| Max. rapid traverse speed | 35 m/min |
| Weight | approx. 3,000 kg |
| Coolant tank capacity | 230 litres |
| Dimensions (L x W x H) | approx. 2,570 x 1,275 x 1,850 mm |
| Main spindle side | SP-32 |
|---|---|
| Number of axes | 4 |
| Axes main spindle (headstock) | Z1 / C1 |
| Axes tool post | X1 / Y1 |
| Max. machining diameter | 32 mm |
| Max. headstock stroke (sliding/fixed headstock) | 310 mm / 80 mm |
| Max. main spindle drive power | 7.5 kW |
| Max. main spindle speed | 7,000 rpm (option High Torque 5,600 rpm) |
| Tools on the tool post | |
| Turning tools | 6 tools (□ 16 mm) |
| Drilling tools (5-spindle drilling unit) | 3 tools (ER16) / 2 tools (ER20) |
| Cross machining tools | 6 tools (ER16) |
| Max. cross machining drive power | 2.0 kW |
| Max. speed cross machining | 5,000 rpm |
| Sub spindle side | SP-32 |
|---|---|
| Number of axes | 3 |
| Axes sub spindle | X2 / Z2 / C2 |
| Max. gripping diameter | 32 mm |
| Max. sub spindle drive power | 3.7 kW |
| Max. sub spindle speed | 7,000 rpm (option High Torque 5.600 rpm) |
| Backworking tools | |
| Tool stations | 5 units (4 power-driven) |
| Max. backworking speed | 6,000 rpm |
Standard scope of delivery
- FANUC 0i-TF Plus control system with electronic handwheel
- C axis control as standard on main and sub spindle
- synchronously driven guide bush unit
- convertible from sliding headstock to fixed headstock lathe
- 6-station tool holder on the tool post
- 6 + α power-driven tools on tool post for cross machining
- 5-station drilling unit including sleeves on the front and rear side
- 5 + α power-driven tools including sleeves for backworking on 4 stations
- broken cut-off tool detector
- parts ejection detector
- sub spindle air blow unit
- sub spindle parts ejection detector
- parts conveyor to remove the parts
- separate coolant tank with level monitoring and coolant flow detector
- bar feeder interface
- toolbox with special tools
- metric input
- tool nose radius compensation
- constant cutting speed for main and sub spindle
- multiple canned cycles
- operating hours display
- parts counter
- automatic power supply cut-off function
- interfaces to input and read data
- program sequence controllable with electronic handwheel
- bar feeding: bar feeder
- chip disposal: chip conveyor
- long parts ejector
- beacon: acc. to customer requirements
- high pressure unit: 50 to 300 bar
- fire protection: small fire extinguishing system
- complete filtration coolant
- Tools in the internet at www.star-tools.eu
Your advantages
with star Micronics
- Training
STAR Micronics GmbH offers special training sessions for machine operators. You as customer can decide whether to have the training in our company or on your premises. The training is naturally exclusively for your personnel and specifically designed for your range of parts. - High pressure unit
The machine can be retrofitted with high pressure units from 50 to 300 bar. In addition, other developments are available to you, such as programmable pressure control or complete filtration. - Cooling lubricants
The machine can be run with oil or with aqueous emulsions. However, we recommend the use of oil as this is far more beneficial to the longevity of the machine. - Bar feeder
All commonly available bar feeders (FMB/IEMCA/LNS) can be used with the machine. The software interface is included in the machine as standard.
- Chip conveyor
The machine can be fitted with a chip conveyor or a chip flushing system. - Peripherals
Peripheral components such as parts separators, purchased coolant units (oil/emulsion), coolant filters, fire protection systems and TPM (tool process monitoring) can also be offered. A retrofit of peripheral components is always possible. - Service
SSC star* Service Connect as 24/7 customer portal and online connectivity for your machines, tickets and service calls. A current overview can be called up at any time. In addition, you have access to the star* knowledge database
Müller Products can easily be combined with and configured to your star* machine.
REQUEST quotation NOW
You will receive a quotation for a star* SP-32 with a standard configuration.
Download
SP-32 brochure
HFT Flyer
