SW-12R II
THE ADVANTAGES
The new SW-12R II automatic CNC sliding headstock lathe was developed on the basis of the renowned SW-7 series. The machine is extremely attractive due to its compact size and universal use as either a sliding or fixed headstock lathe. The new SW-12 RII is characterised by high speeds on the main and sub spindle (15,000 rpm) and fully independent machining with 3 tool systems.
- FANUC 31i-B5 control system
- Spindle speeds on the main and sub spindle up to 15,000 rpm
- C axis control as standard on main and sub spindle
- Fully independent rear side
- Convertible from sliding headstock to fixed headstock lathe
- Movable control panel
- Two tool posts for simultaneous machining on the front side
- Low space requirement
- Three independent tool systems
KINEMATICS & TOOLS
- 7 turning tools
- Each with 4 drilling tools (front and rear side)
- 6 + α power-driven tools on the tool post
- 8 + α power-driven tools for backworking
- 10 axes
| specifications | ||
|---|---|---|
| Diameter |  |
12 mm |
| Length |  |
135 mm / 30 mm (fixed headstock) |
| Machining options |  |
|
| C axis |  |
Main spindle |
| C axis | |
Sub spindle |
KINEMATICS OF THE SW-12R
| FRONT SIDE | |
|---|---|
| Number of axes | 10 |
| Main spindle (headstock) | Z1 / C1 axis |
| Tool post 1 | X1 / Y1 axis |
| Tool post 2 | X3 / Y3 axis |
| Max. machining diameter | 12 mm |
| Max. headstock stroke (standard) | 135 mm / 30 mm |
| Drive power main spindle | 3.7 kW |
| Max. main spindle speed | 15,000 rpm | Tools on the tool post |
| Turning tools | 7 tools (□ 10mm) |
| Drilling tools (4-spindle drilling unit) |
4 tools (ER11) |
| Cross machining tools | 6 tools (ER11) |
| Max. speed | 12.000 rpm |
| SUB SPINDLE | |
|---|---|
| Sub spindle | X2 / Y2 / Z2 / C2 axis |
| Max. gripping diameter | 12 mm |
| Drive power | 3.7 kW |
| Max. sub spindle speed | 15,000 rpm |
| Backworking tools | |
| Drilling tools (4-station tool holder) |
4 tools (Ø 16 mm sleeve) |
| Drive (standard) | 8 tools |
| Max. spindle speed | 12,000 rpm |
